Application Instructions:

• Carefully take out the decals from the container.
• Place the decals on a table before applying. Check the left and right sides properly to ensure the sticker is in the appropriate position without any bubbles or overlapping. Count the number of pieces.
• Clean the surface of your car with distilled water (do not use ground or hard water) to remove all dust and grease. Wipe with a clean, dry cloth.
• Gently remove the paper from the bottom of the decals.
• Moisten the decals with water on the back side and paste them on the desired location.
• When satisfied with the placement, apply the decals on the surface using a squeegee and water.
• Set the decals on the surface. Once satisfied with the placement, apply the decals firmly.
• Gently remove the protective tape, ensuring the decal does not get stretched.

Important Instructions:

• No returns will be accepted if the seal is broken.
• Professional installation is highly recommended for this product.
• If there is moisture in the air, use a heat air dryer on the surface of the vehicle (not on decals) to remove excess water from the decals.
• It is recommended to apply decals in sunlight to make application easier.
• Wipe with isopropyl alcohol or another residue-free cleaner. Do not use toluene as it may spoil the metallic paint top coat.
• Dry the surface with a clean, lint-free cloth before the cleaning solvent evaporates.
• Do not wash your car for a minimum of 24 hours after applying the decals.